The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
Features:
- Bluetooth
- Highly Efficient with up to 94% Effciency
- Adaptive 6 Stage charging algorithm
- Storage Mode
- Charges Lead Acid & Lithium Batteries
3 Output model Important Information:
All Batteries connected to this charger MUST be capable of a maximum charge rate of either 30 Amps or 15 Amps dependant on whether high or low current mode is selected.
There is no individual charge cycle for each separate battery, therefore all batteries will follow the same charge cycle.
As this charger contains an integrated FET battery isolator, it is therefore possible to charge three batteries with a single charger whilst keeping the batteries isolated. Charging current is divided among the batteries dependant on battery state of charge in combination with battery parameters and other circuit parameters.
The charger, when connected to multiple batteries will raise the voltage of the lowest battery at the selected full current until it matches the second lowest battery voltage. At this point the available current is spread between these two batteries. When the voltage of the two batteries then matches the third battery the current is divided between the three batteries. All batteries will then reach absorption phase together and cycle together.
ee batteries. All batteries will then reach absorption phase together and cycle together.